Panic Alarm Master Station • User Manual
6
Chapter 2 Activation
You should activate the master station first before you can use the master station.
Local activation, activation via SADP software, and activation via client software are supported, you can choose
any one of the methods to activate the master station.
Activating Locally
Purpose:
You can activate the device locally when you access the device for the first time.
Power the master station on, there will be a pop-up window for device activation.
Create an activation password and enter the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password regularly, especially
in the high security system, resetting the password monthly or weekly can better protect your product.
Note: Activation password can be used for adding the master station device to SADP or Client software.
Tap OK to activate the device.
Activating via SADP Software
Purpose:
To Next Page
Loading...
Need help?
General
