Panic Alarm Master Station • User Manual
31
After exporting the configuration file successfully, click OK to close the window.
Notes:
The configuration file name format: *****.bin. The length of the file name is up to 32 characters (contain
4 byte suffixes).
The configuration file name cannot contain the characters: \/:*?”<>|.
Importing Configuration File
Purpose:
In this section, you can import the configuration file from the USB flash driver to device.
Steps:
On the USB flash driver management page, click in the Import Configuration File line to pop up a window.
Select a configuration file, and click OK.
After importing the configuration file successfully, click OK and the device will reboot. The configuration file
will take effect after rebooting.
Notes:
The configuration file name format: *****.bin. The length of the file name is up to 32 characters (contain
4 byte suffixes).
The configuration file name cannot contain the characters: \/:*?”<>|.
Upgrading Master Station
Purpose:
In this section, you can upgrade the master station through USB flash driver.
Steps:
On the USB flash driver management page, click in the Master Station Upgrade line to pop up a window.
Select an upgrade file, and click OK.
After upgrading successfully, click OK and the device will reboot. The upgrade will take effect after rebooting.
Note: The upgrade file name format: *****.dav.
Managing MicroSD Card
Purpose:
In this section, you are able to view the SD card capacity, valid capacity, status and format SD card.
Before managing the microSD card, you need to insert the microSD card into device.
Steps:
On the home page of master station, click System Config to enter the page.
To Next Page
Loading...
Need help?
General
