Panic Alarm Master Station • User Manual
29
Tap to enter the System Maintenance page.
Tap Basic Settings to enter the basic settings page.
Basic Settings Page
Viewing Device Information
Enter the basic settings page, click in the Device Information line, you can view the device type and version in
the pop-up window.
Cleaning the screen
Purpose:
You are able to enable this function for screen clean. If you enable this function, the master station won’t do
nothing when you touch the screen, and you can use the cleaning tool to clean the screen.
Steps:
On the Basic Settings page, slide the slider to enable Clear Screen.
Cleaning the screen.
Long press the broadcast button to exit the clear screen mode.
Rebooting Master Station
Purpose:
You are able to reboot the master station locally.
On the Basic Settings page, click in the Reboot line to pop up the Reboot Device window. You can click OK to
reboot the master station, or click Cancel to cancel the operation.
Restoring Defaults
Purpose:
To Next Page
Loading...
Need help?
General
