112
6.7 Measuring Harmonic
(3) Change the Axis Scale.
(4) Move the Cursor.
(5) Change the Harmonic Order to be Displayed.
Select "All order" or "Odd order" as the harmonic order to be dis-
played.
❖
5.5.2 Setting the Harmonic Order for Display (page 87)
• When the y-axis represents the linear scale (log scale), if the
F4
(LIN/LOG) key is pressed, the scale is changed to log (lin-
ear).
• The full scale of the linear axis depends on the range.
Press the
F4
(LIN/LOG) key to change the axis scale.
LIN/
LOG
Press / of the cursor key to move the cursor (dotted line) on
the screen. The level of each order of harmonic, content, or phase
angle at the cursor position is shown as a number.
To Next Page
Loading...
