Hioki 3169-20 - Page 119

6.7 Measuring Harmonic
111
1
2
3
4
5
6
7
8
9
10
11
(1) Change the Channel to be Displayed.
(2) Change the Item to be Displayed.
Press the
F2
(CH) key to display the selection window.
*: When multiple circuits are set, I and P are followed by a circuit
number. (Ex., I1_1, I1_2, P_1, P_2)
Select a channel to be displayed using the cursor key.
Press the
F1
(select) key.
1P2W U1, I1, P
1P3W U1, U2, I1, I2, P
3P3W2M U1, U2, U3, I1, I2, I3, P
3P3W3M U1, U2, U3, I1, I2, I3, P
3P4W U1, U2, U3, I1, I2, I3, P
3P4W4I U1, U2, U3, I1, I2, I3, I4, P
select
CH
Press the
F3
(ITEM) key to display the selection window.
Select an item to be displayed using the cursor key.
Press the
F1
(select) key.
Level, Percentage, Phase angle
select
ITEM