.1 Features
(1) 10μΩ minimum high accuracy and high resolution resistance measurement,
by 4-terminal measurement
(2) High speed resistance measurement of 90 times/second in its top
(3) Connecting the temperature probe makes 0℃ to 40℃ temperature
measurement possible
(4) Auto range function is contained
(5) Measurement ranges can be selected from external control terminal.
(6) The components can be selected by the comparator. When changing the
measurement subjects, the 15 comparator tables set in advance make it
possible. They can also be selected by external control terminal.
(7) When connecting the temperature probe, the resistance temperature is able to
be corrected by optional temperature and resistance temperature coefficient.
(8) The temperature of the measured object can be displayed, by conversion from
the measured resistance. Either the temperature (t) or the temperature rise
(Δt) of the measured object can be selected for display.
A comparator can also be used to provide a pass/fail decision from the
displayed value.
(9) The unit can hold up to 15 sets (tables) of temperature conversions in memory.
The setting table can also be selected using the external control terminals.
(10) Trigger input, BCD output and comparator output make the unit match for
the line use.
(11) The measurement results can be printed with the 9203 DIGITAL PRINTER.
The results also can be shown as statistics. (option)
(12) Full remote control by GP-IB is possible (option).
(13) The measurement results can be printed to the centronics printer (option).
To Next Page
Loading...
