Hioki 3227 - 8.2 Setting the GP-IB Address

68
────────────────────────────────────────────────────
8.2 Setting the GP-IB Address
────────────────────────────────────────────────────
SHIFT
GP-IB ADRS
DOWN
UP
ENTER
CLEAR
8
.2 Setting the GP-IB Address
1. Press the SHIFT key and enter the shift states. "SHIFT" on the display
lights.
2. Press the cursor key and enter the GP-IB address setting mode.
Flash the present GP-IB address setting.
3. Select the GP-IB address with the
UP or DOWN key. ("00" to "30")
4. Pressing the
ENTER key selects the GP-IB address and return to the
original measurement mode.