Hioki 3227 - Chapter 10 Maintenance and Service; 10.1 Changing the Fuse

131
────────────────────────────────────────────────────
10.1 Changing the Fuse
────────────────────────────────────────────────────
1
0.1.1 Power Fuse
WARNIN
G
To avoid electric shock, turn the power switch off, disconnect the power
cord from the connector, and disconnect the input cable from the object
to be measured before replacing the power fuse.
Only use fuses of the specified type that is rated for the specified
current and voltage. Using a fuse that does not meet the specifications
or shorting the fuse holder may cause an accident that might result in
injury or death.
Chapter 1
0
Maintenance and Servic
e
1
0.1 Changing the Fuse
The power fuse and a spare fuse of this unit are in the power inlet.
Change the power fuse followingly.