Hioki 3227 - 4.2 Selecting the Measurement Mode

30
────────────────────────────────────────────────────
4.2 Selecting the Measurement Mode
────────────────────────────────────────────────────
TEMP
0 ADJ
M
Resistance Measurement Mode
Temperature Measurement Mode
NOTE
4
.2 Selecting the Measurement Mode
Pressing the TEMP key (temperature measurement key) selects either the
resistance measurement mode or the temperature measurement mode.
When the 9188 is not connected, the temperature mode is unable to select. If
intend to select, error is generated.