Hioki 3227 - Chapter 4 Basic Operations

27
────────────────────────────────────────────────────
4.1 Operating Procedure
────────────────────────────────────────────────────
4
.1.1 Function Classes
Turning on the powe
r
Self test
Resistance measurement mode
Comparator setting mode
Temperature correction setting mode
Frequency setting mode
GP-IB address setting mode
Temperature measurement mode
Selecting the measurement range
Selecting the sampling rate
Selecting the comparator executing
Selecting the temperature correction
executing
Selecting the measurement holding
Executing the zero adjustment
Selecting the measurement holding
A
B
A: This shows every kind of mode. The key input are accepted in this mode. Otherwise, in the
resistance measurement mode and the temperature measurement mode, execute and display
the measurement.
B: Select and execute each settings. After selecting or executing, return to the primary mode.
Selecting the temperature correction/the temperature conversio
n
Temperature conversion setting mode
Selecting the temperature
conversion executing
Chapter
4
Basic Operation
s
4
.1 Operating Procedure