Hioki 3227 - Eliminating the Comparator Table

42
────────────────────────────────────────────────────
5.1 Setting the Comparator
────────────────────────────────────────────────────
5
.1.3 Eliminating the Comparator Table
SHIFT
DOWNUP
ENTER
CLEAR
COMP
SET
SHIFT
(1) Press the SHIFT key and enter the shift states.
"SHIFT" on the display lights.
(2) Press the
COMP key and enter the comparator table
setting mode.
(3) Select the comparator table intend to eliminate.
See Section 5.1.1, "Setting the Comparator Table", for
details.
(4) Press the
SHIFT key and enter the shift states.
"SHIFT" on the display lights.
(5) Pressing the
CLEAR (ENTER) key invalidates the
displaying comparator table and return to the
resistance measurement.
In this case, the comparator is not executed. (It would
be OFF.)