Hioki 3227 - Executing the Comparator

43
────────────────────────────────────────────────────
5.2 Executing the Comparator
────────────────────────────────────────────────────
COMP
SET
NOTE
5
.2 Executing the Comparator
Pressing the COMP key displays the comparator table number in order ("01" to
"15", "OFF"). In this case, skip the comparator table which has not been set
or been invalidated in Section 5.1.3, "Eliminating the Comparator Table."
Return to the resistance measurement mode after displaying the comparator
table number about for a second, and execute the comparator.
When intend to execute the comparator during using the auto range, the
range becomes the manual range automatically. During executing the
comparator, the auto range is unable to use.