Hioki 3227 - Inspection; Introduction

i
────────────────────────────────────────────────────
Introduction
────────────────────────────────────────────────────
I
ntroduction
I
nspection
Thank you for purchasing this HIOKI "3227 mΩ HiTESTER." To get the
maximum performance from the unit, please read this manual first, and keep
this at hand.
When the unit is delivered, check and make sure that it has not been
damaged in transit. In particular, check the accessories, panel switches, and
connectors. If the unit is damaged, or fails to operate according to the
specifications, contact your dealer or HIOKI representative.
Accessories
9287 CLIP TYPE LEAD 1
9188 TEMPERATURE PROBE 1
Power code 1
Converter plug 1
Instruction Manual 1
Spare fuse for the circuit protection F1.0A/250V 1
Spare fuse for the power supply 1
T0.5A/250V (at 100/110/120V)
T0.25A/250V (at 200/220/240V)
(The spare fuse is stored inside the AC power supply inlet, and is of a rating
appropriate to the actual operational voltage of the unit.)
Shipment
If reshipping the unit, preferably use the original packing.