Hioki 3237 - Page 90

78
_____________________________________________________________________________________________
7.4 Command Reference
______________________________________________________________________________________________
Syntax
[:SENSe:]VOLTage[:DC]:RANGe:AUTO
[:SENSe:]VOLTage:AC:RANGe:AUTO
[:SENSe:]CURRent:DC:RANGe:AUTO
[:SENSe:]CURRent:AC:RANGe:AUTO
[:SENSe:]RESistance:RANGe:AUTO
[:SENSe:]LPResistance:RANGe:AUTO
[:SENSe:]FRESistance:RANGe:AUTO
[:SENSe:]LPFResistance:RANGe:AUTO
data
ON/1: Auto Range enabled.
OFF/0: Auto Range disabled.
Function
Selects to enable or disable Auto Range of th specified measurement function.
Example
Transmission :SENSE:VOLT:AC:RANG:AUTO ON
VOLT:AC:RANG:AUTO 0
Syntax
[:SENSe:]VOLTage[:DC]:RANGe:AUTO?
[:SENSe:]VOLTage:AC:RANGe:AUTO?
[:SENSe:]CURRent:DC:RANGe:AUTO?
[:SENSe:]CURRent:AC:RANGe:AUTO?
[:SENSe:]RESistance:RANGe:AUTO?
[:SENSe:]LPResistance:RANGe:AUTO?
[:SENSe:]FRESistance:RANGe:AUTO?
[:SENSe:]LPFResistance:RANGe:AUTO?
data
Character data
ON/OFF
Function
Inquires whether the specified measurement function is set in Auto Range or not.
Response
syntax
Headers: ON :SENSE:CURRENT:DC:RANGE:AUTO data
Headers: OFF data
Example
Headers: ON
Transmission RES:RANG:AUTO?
Response :SENSE:RESISTANCE:RANGE:AUTO ON
Headers: OFF
Transmission RES:RANG:AUTO?
Response ON
The resistance measurement function is in Auto Range.
Setup for Auto Range
Inquiry concerning Auto Range