Hioki 3237 - Page 97

85
_____________________________________________________________________________________________
7.4 Command Reference
______________________________________________________________________________________________
Syntax
:CALCulate:LIMit:UPPer?
data
NR1 numerical data
-199999 to 199999
Function
Inquires about the upper-limit value of the comparator.
Response
syntax
Headers: ON :CALCULATE:LIMIT:UPPER data
Headers: OFF data
Example
Headers: ON
Transmission :CALC:LIM:UPP?
Response :CALCULATE:LIMIT:UPPER 130000
Headers: OFF
Transmission :CALC:LIM:UPP?
Response 130000
The upper-limit value of the comparator is 130000.
Syntax
:CALCulate:LIMit:LOWer data
data
NRf numerical data
-199999 to 199999
Function
Sets the lower-limit value to be used for comparator determination in a count value.
Example
Transmission :CALC:LIM:LOW 145000
Sets the comparator lower-limit value to 145000.
Syntax
:CALCulate:LIMit:LOWer?
data
NR1 numerical data
-199999 to 199999
Function
Inquires about the lower-limit value of the comparator.
Response
syntax
Headers: ON :CALCULATE:LIMIT:LOWER data
Headers: OFF data
Example
Headers: ON
Transmission :CALC:LIM:LOW?
Response :CALCULATE:LIMIT:LOWER 120000
Headers: OFF
Transmission :CALC:LIM:LOW?
Response 120000
The lower-limit value of the comparator is 120000.
Inquiry concerning the comparator upper-limit value
Setup for comparator lower-limit value
Inquiry concerning comparator lower-limit value