113
────────────────────────────────────────────────────
8.4 Command Reference
────────────────────────────────────────────────────
■ Waits until display is updated.
Syntax
*WAI
Function
If this command is executed during continuous display, it will not wait until
sampling is completed.
Notes
･ If this command is executed during the hold condition, the displayed data will
not change.
･ If this command is executed during range switching over, no displays change.
Error
System error/ This command is not executed. A device dependent error occurs.
Example
Transmission
Response
":HOLD OFF;:MEAS? V;*WAI;:MEAS? V"
"V +100.01E+0;V +101.02E+0"
*
WAI
To Next Page
Loading...
