Hioki 3332 - Chapter 5 Setting and Measurement Example; 5.1 Electrical Power Integration and Printer Output Examples

65
────────────────────────────────────────────────────
5.1 Electrical Power Integration and Printer Output Examples
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Reset the integration value.
Set the voltage range to 300 V.
Set the current range to 10 A.
Set the integration time to 1 hour.
Set the printer interval time to 10 minutes.
Set the printer item to TIME and +Wh.
Set the interface.
Start the integration.
Chapter 5
Setting and Measurement
Example
5.1 Electrical Power Integration and Printer Output
Examples
Will integrate electrical power of 200 V, 10 A max. for 1 hour. Every ten
minutes, the integration time and +Wh will be printed.