Hioki 3332 - Simple Use

13
────────────────────────────────────────────────────
2.2 Simple Use
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
測定対象のラインが遮断されていることを確認、 およ
び本器の電源が OFF され電源コードを抜いてあること
を確認する
Check that the line to be measured is shut off, and
check that this unit is powered off and the power
cord disconnected from the outlet.
Make a connections.
Check that there is no short circuit.
Connect the power cord of the 3332 to the outlet.
Turn the 3332 power on.
Set the display item.
Reference
Section 2.3, "Making the Connections"
Section 2.4, "Powering On "
Section 3.3, "Selecting the Display "
Section 3.4, "Selecting the Range"
Chapter 3, 4
(Warming-up for more than 30 minutes)
Set the measurement range.
Start the measurement.
Set the each items.
Check the connection of line being measured again,
and turn on the power line.
2.2 Simple Use