Hioki 3332 - 1.4 Explanation for Keys

4
────────────────────────────────────────────────────
1.4 Explanation for Keys
────────────────────────────────────────────────────
Key
Notation
in this manual
Operations Section
a
AVE・FREQ
a
Changes the display on the display a.
3.3
AVE・FREQ
Sets the averaging count and frequency.
4.4, 4.5
b
PT･CT･SC
b
Changes the display on the display b.
3.3
PT･CT･SC
Sets the PT/CT ratio and SC.(scaling)
4.7
c
c
Changes the display on the display c.
3.3
Moves the cursor to the left.
4to6
d
d
Changes the display channel on the display d.
3.3
Moves the cursor to the right.
4to6
CH
COMP.1
CH
Displays Comparator screen.
4.11
COMP1
Sets the comparator 1.
4.10
TABLE
COMP.2
TABLE
Changes the comparator table.
4.11
COMP2
Sets the comparator 2.
4.10
RESPONSE
▲
RESPONSE
Switches the response speed (FAST/SLOW/AUTO).
3.1
▲
Increases the setting value.
4to6
RECTIFIER
▼
RECTIFIER
Switches the rectifier type (RMS/MEAN/
MEAN+FILTER)
3.2
▼
Decreases the setting value.
4to6
D/A
U
U
Decreases the voltage range.
3.4
D/A
Sets the D/A output item.
4.6
INTEG
U
Increase the voltage range.
3.4
INTEG
Sets the integration time.
4.3
ENTER
I
I
Decreases the current range.
3.4
ENTER
Enter the setting value.
4to6
RANGE SEL
I
Increases the current range.
3.4
RANGE SEL
Selects the measurement range.
4.12
1.4 Explanation for Keys
To get the lower key indications, press the
SHIFT
key first.