5
────────────────────────────────────────────────────
1.4 Explanation for Keys
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Key
Notation
in this manual
Operations Section
DATA OUT
PRINT
DATA OUT
Outputs the measured value on the printer.
8.2, 8.7
PRINT
Sets the printer interval and output item.
4.8
START/STOP
RESET
START/STOP
Stops or starts the integration operation.
4.3.3
RESET
Resets the integration value.
4.3.3
HOLD
PEAK HOLD
HOLD
Holds the display value.
3.5
PEAK HOLD
Holds the peak value and maximum value.
3.5
HELP
INTERFACE
HELP
Outputs the setting values on the printer.
8.2, 8.7
INTERFACE
Sets the GP-IB and RS-232C.
4.9
LOCAL
KEY LOCK
LOCAL
Releases the remote state via interface.
8.2
KEY LOCK
Sets the key lock state.
6.5
SHIFT
EXIT
SHIFT
Validates the lower indicated function key.
(indicator is lit) This key is accepted even in
the key lock state.
2to6
EXIT
Exits the setting mode and moves to
Measurement screen or Comparator screen.
4to6
Key operations during self-test when powering on
SHIFT
→
RESET
: system reset is performed after self-test
SHIFT
→
ENTER
: enter mode for changing the clock frequency of power
calculation circuit after self-test.
①→②:Press① and then ② in order.
To Next Page
Loading...
