Hioki 3332 - Initialization

180
────────────────────────────────────────────────────
8.5 Command Summary
────────────────────────────────────────────────────
8.5.6 Initialization
Initialize method
Item
Power on
Keyboard
reset
*RST
command
Device
clear
*CLS
command
GP-IB device address
－ ● － － －
RS-232C setting
－ ● － － －
Device specific functions (ranges
etc.)
－ ● ● － －
Output queue
● ● － ● －
Input buffer
● ● － ● －
Status byte register
● ● － － *1 ● *2
Event registers
● *3 ● － － ●
Enable registers
● ● － － －
Current path
● ● － ● －
Headers on/off
● ● ● － －
Terminator for response messages
● ● － － －
Separator for response messages
● ● ● － －
The following table shows which items are initialized and which not, under
various conditions.
*1 Only the MAV bit (bit 4) is cleared.
*2 All bits except the MAV bit are cleared.
*3 Except the PON bit (bit 7).