Hioki 3332 - Chapter 6 Other Functions; 6.1 When Power Fails

73
────────────────────────────────────────────────────
6.1 When Power Fails
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Chapter 6
Other Functions
6.1 When Power Fails
(1) If a power failure occurs during integration, the integration restart
(continues) after the power is restored.
(2) When the GP-IB or RS-232C interface is in "Pr." mode, and if the power
failed while integration was in progress, the measurement data at the time of
power failure is printed, together with the integration elapsed time and a
message "POWER FAILURE."
(3) During the above power failure processing, the display appears as follows.