186
────────────────────────────────────────────────────
8.7 Printer Output Function
────────────────────────────────────────────────────
8.7.3 Selecting Printing Items and Setting Printing Interval Time
8.7.4 Printer Output Buffer
8.7.5 Printing in Power Cut
Refer to Section 4.8, "Setting the Printer Output."
When no printing items are selected, printer elapsed time and items which is
displayed in display a, b, c, and d are printed.
In addition, if the print time interval is not set, interval printing is not done.
If in Co. mode, output to the printer is not done.
Printer output buffer of the 3332 consists of 2000 bytes.
When buffer exceeds the capacity, "Err.022" is printed and data which are
obtained after that become invalid.
When the power is cut off during interval printing, after returned from that
state, "
***
POWER FAILURE
***
" and measured data are printed and
return to normal interval printing.
To Next Page
Loading...
