Hioki 3332 - Restrictions During the Peak Hold Status

29
────────────────────────────────────────────────────
3.5 Holding the Display
────────────────────────────────────────────────────
3.5.3 Restrictions During the Peak Hold Status
Item Display
Selecting integrate time
Selecting number of averaging
Selecting frequency measurement source and range
Selecting D/A output items
Setting the PT ratio
Setting the CT ratio
Setting the SC
Selecting range
・Shifting of response, range and rectifier type are not allowed. ("Err.016" is
displayed.)
・Even if the auto-ranging is set for voltage, current, or frequency the range
cannot be changed. The range is fixed when the range is held.
If the HOLD state is released, auto-ranging function restarts.
・The following settings cannot be changed. ("Err.017" is displayed.)
Press the
SHIFT
→
PEAKHOLD
key to release the hold state (the HOLD
indicator goes off) the settings can be changed.