Hioki 3332 - CAUTION

v
────────────────────────────────────────────────────
Notes on Use
────────────────────────────────────────────────────
CAUTION
・ Before measurement, check the position of the measurement range.
The unit may be damaged if voltage or current at levels in excess of
the measurement limit is applied for a long time.
・ To avoid damage to the unit, do not short the output terminal and do
not input voltage to the output terminal.
・ Do not store or use the unit where it will be exposed to direct sunlight,
high temperatures, high humidity, or condensation. If exposed to such
conditions, the unit may be damaged, the insulation may deteriorate,
and the unit may no longer satisfy its specifications.
・ This unit is designed for indoor use and can be safely used at
temperatures ranging from 0℃ to 40℃.
・ To avoid damage to the unit, do not subject the equipment to
vibrations or shocks during transport or handling. Be especially careful
to avoid dropping the equipment.
・ Should the unit emit smoke, or a strange smell or strange sound,
immediately stop testing operations, power the unit off, and remove the
power cord from the outlet, shut off the circuit being tested,
disconnect the unit, and consult your HIOKI representative. Continued
use of the unit could lead to fire or electric shock accidents.
・ Do not insert foreign objects through the ventilation holes. Particularly
if metallic, liquid, or combustible substances get inside the case, this
may lead to fire or electric shock, or to malfunction.
・ Do not use the unit near any device which generates strong
electromagnetic radiation or near a static electrical charge, as these
may cause errors.
・ To prevent electric shock, do not allow the unit to become wet and do
not use the unit when your hands are wet.
・ This unit is not constructed to be waterproof or dustproof, so do not
use it in a very dusty environment or in one where it will get wet.
・ Do not place the unit on an unstable stand, or in an uneven location. It
may fall to the ground, or fall over, and either of these events may lead
to malfunction or accident.
・ Avoid treading on or pinching the cable so as not to damage the cable
sheaths.
・ Keep the cables well away from heat, to prevent the possibility of
melting the insulation.
・ For long-term storage, remove the power cord.
・ Do not use the unit near any device which generates strong
electromagnetic radiation or near a static electrical charge, as these
may cause errors.
・ The recommended calibration interval for this instrument is six months.