Hioki 3332 - Page 168

154
────────────────────────────────────────────────────
8.4 Command Reference
────────────────────────────────────────────────────
■ Queries the setting for the RS-232C communications handshake.
Syntax
RS232c?
Function
Returns the current setting for the RS-232C communications handshake as X,
HARD or OFF, the setting for execution confirmation message as ON or OFF .
Notes
･ With this query, if any error occurs, no response message is produced.
･ By using the ":TRANsmit:SEParator" command, the message unit separator
can be changed from the semicolon ";" to the comma ",".
･ Even if a system error occurs, this query is executed.
Response
syntax
Headers: ON
Headers: OFF
":RS232C:HANDSHAKE_<X/HEAD/OFF>;ANSWER_<ON/OFF>"
"<X/HEAD/OFF>;<ON/OFF>
Errors
･ Query error/ If the response message is longer than 1000 bytes.
･ Execution error/ If this query is executed when using GP-IB interface
Example
Transmission
Response
Headers: ON
Headers: OFF
":RS232?"
":RS232C:HANDSHAKE OFF; ANSWER OFF"
"OFF;OFF"
RS232c?
(Command for the RS-232C interface)