Hioki 3332 - Page 217

203
────────────────────────────────────────────────────
11.1 General Specifications
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Measure line
Single phase two-wire
Measurement Method
Analog processing, Digital display method (LED)
Location for use
Indoors, altitude up to 2000m (6562 feet)
Operating temperature and
humidity ranges
0℃ to 40℃ (32
｡
F to 104
｡
F), 80% RH with no condensation
Storage temperature and humidity
ranges
-10℃ to 50℃ (14
｡
F to 122
｡
F), 80% RH with no condensation
Accuracy assurance temperature
and humidity ranges
23℃±5℃ (73
｡
F±9
｡
F), 80% RH or less (Unless it is otherwise
noted, it is set at this temperature/humidity standard.)
Maximum input voltage
Maximum input current
Voltage: 600 V rms value, 1100 V peak value
Current: 60 A rms value, 90 A peak value
Maximum rated voltage to earth
600 Vrms 50/60 Hz
Input resistance (50/60 Hz)
Voltage: 2 MΩ±10%
Current: 2 mΩ max.
Dielectric strength
(50/60 Hz, for 1 minutes)
3.32 kVAC between voltage and current input terminals and case,
interface, output terminal and external control terminal
between voltage and current input terminals and
power supply, between voltage input terminal and
current input terminal
1.39 kVAC between power supply and case, interface, output
terminal and external control terminal
Rated power voltage (50/60 Hz)
100 to 240 VAC switchable
(Voltage fluctuations of 10% from the rated supply voltage are
taken into account.)
Rated power
40 VA (Power voltage 100 to 120 V)
50 VA (Power voltage 200 to 240 V)
Chapter 11
Specifications
11.1 General Specifications