Hioki 3332 - Page 38

24
────────────────────────────────────────────────────
3.3 Selecting the Display
────────────────────────────────────────────────────
From 0 minute to 999 hours
and 59 minutes
From 1000 to 9999 hours
and 59 minutes
1000 hours
From 1000 to 9999 hours
and 59 minutes
500 Hz ran
g
e 100 kHz ran
g
e
NOTE
The elapsed time is displayed as follows;
For the frequency display, the frequency measurement range is displayed as
follows;
･ Under setting condition, constants or condition is displayed on the display.
･ If the electrical current phase is leading compared to the voltage phase, the
displays for reactive power, power factor, and phase angle will show a "-"
for polarity.
･ If the frequency item or range is changed, "-----" appears until the
measurement is completed.
･ Distortion or noise on the input waveform can cause the displayed frequency
measurement value to be incorrect.