Hioki 3332 - Page 4

Chapter 4 Settings and Operations 31
4.1 Setting Items
31
4.2 Operating Setup Keys
32
4.3 Setting the Integration
33
4.3.1 Flowchart
33
4.3.2 Integration Setting Method
33
4.3.3 Integration Operation 34
4.3.4 Notes on Integration 35
4.3.5 Display Format of Integrating Value 38
4.4 Setting the Number of Averaging
40
4.4.1 Flowchart 40
4.4.2 Average Setting Method 40
4.5 Setting the Frequency
42
4.5.1 Flowchart 42
4.5.2 Frequency Setting Method 42
4.6 Setting the D/A Output
44
4.6.1 Flowchart 44
4.6.2 D/A Output Setting Method 44
4.7 Setting the PT (Potential Transformer) Ratio, CT
(Current Transformer) Ratio, and SC (Scaling Factor)
47
4.7.1 Flowchart 47
4.7.2 PT/CT Ratio and SC Setting 47
4.8 Setting the Printer Output
49
4.8.1 Flowchart 49
4.8.2 Printer Output Setting Method 49
4.8.3 Connecting to the Printer 52
4.9 Setting the Interface
53
4.9.1 Flowchart 53
4.9.2 Interface Setting 53
4.10 Setting the Comparator
56
4.10.1 Flowchart 56
4.10.2 Comparator Setting Method 56
4.10.3 Comparator Operation 58
4.11 Displaying Comparator
59
4.11.1 Flowchart 59
4.11.2 Comparator Display Setting Method 59
4.12 Selecting Range
62
4.12.1 Flowchart 62
4.12.2 Range Setting Method 62