55
────────────────────────────────────────────────────
4.9 Setting the Interface
────────────────────────────────────────────────────
NOTE
Display:
Supplement
Key Key operation
AVE･FREQ
PT･CT･SC
COMP1
COMP2
D/A
INTEG
PRINT
RANGE SEL
Moves to each setting screen.
(4) Move to the measurement display.
Press the
INTERFACE
or
EXIT
key. (SHIFT indicator off)
Printer mode (Pr.) and Control mode (Co.)
･ When in Pr mode (PRINT indicator is lit), data such as interval print and
manual print are output to the printer.
･ When in Co. mode, only control by the controller is possible through the
interface.
Other keys operations in GP-IB and RS-232C setting mode
(SHIFT indicator is lit):
To Next Page
Loading...
