Hioki BT4560 - Stable Measurement Start (Sample Delay)

39
Starting the Measurement After the Response of the Measuring Object is Stable (Sample Delay Function)
Setting with the deviation of voltage uctuation (∆VOLT)
Alternating Current response of the battery
Sampling
∆
VOLT
∆
VOLT
The slope of Alternating Current response is monitored and sampling is started
when the slope of deviation (∆VOLT) drops below the set value.
1
Press (MENU). (The setting screen appears.)
2
Select [MEAS] tab.
Selection
3
Select [WAVE] or [∆VOLT].
Conrm
(or)
Cancel
Selection
4
Customization of Measurement Conditions