Hioki ST5520-01 - Page 138

130
Command Reference
*IDN?
Queries manufacturer’s name, model name, and software version. No header command is
included in response.
First eld: Manufacturer’s name
Second eld: Model name
Third eld: Serial number
Forth eld: Software version
Syntax
*IDN?
Response
<data>
Example PC>
*IDN?
ST5520>
HIOKI,ST5520,000012345,V1.00
*RST
Resets the instrument setting. When this command is executed during a test, the test is stopped
and the setting is reset. The saved test conditions are also cleared. The interface setting is not
initialized
.
To reset the setting, refer to “5.10 Default Setting List” (p. 73).
Syntax
*RST
Example To execute resetting
PC>
*RST
:STARt
Starts a test.
Syntax
:STARt
Example PC>
:STARt
Error When this command is executed during tests, an execution error occurs.
When this command is executed while the interlock function is activated,
an execution error occurs.
:STOP
Ends a test.
Syntax
:STOP
Example PC>
:STOP