135
Command Reference
:TIMer
Sets the test duration.
Set 0.0 when the test duration is not to be set. During a test, the test is stopped and the test
duration is set.
Syntax
:TIMer <data>
<data> Test duration (unit: second) 0.0 and 0.045 to 999.999 (resolution 0.001),
(NR2 numerical data)
“8.5 Data Format Table” (p. 125)
Example To set the test duration to 10 seconds
PC>
:TIMer 10
:TIMer?
Queries the test duration setting.
The test duration is returned in NR2 numerical data (<data>). 0.0 is returned when the test
duration timer is not to be used.
Syntax
:TIMer?
Response
:TIMER <data>
or simply
<data>
<data> Test duration (unit: second) 0.0 and 0.045 to 999.999 (resolution 0.001),
(NR2 numerical data)
“8.5 Data Format Table” (p. 125)
Example To query the test duration setting (when the test duration is 10 seconds)
PC>
:TIMer?
ST5520>
:TIMER 10.000
(when the
:HEADer
command is ON)
ST5520>
10.000
(when the
:HEADer
command is OFF)
:DELay
Sets the response time. Set 0.0 when the response time is set to auto (AUTO).
If a test is being performed, it is stopped and the response time is set.
Syntax
:DELay <data>
<data> Response time (unit: second) 0.0 and 0.005 to 999.999 (resolution 0.001)
(NR2 numerical data)
“8.5 Data Format Table” (p. 125)
Example To set the response time to 5.5 seconds
PC>
:DELay 5.5
10
9
8
7
6
5
4
3
2
1
Appx. Ind.
To Next Page
Loading...
