Hioki ST5520-01 - Page 150

142
Command Reference
:DISPlay:CONTrast
Sets the LCD contrast.
Syntax
:DISPlay:CONTrast <data>
<data> 0 to 100 (NR1 numerical data)
Example To set the contrast to 60
PC>
:DISPlay:CONTrast 60
:DISPlay:CONTrast?
Queries the LCD contrast. The setting is returned in NR1 number data (<data>).
Syntax
:DISPlay:CONTrast?
Response
:DISPLAY:CONTRAST <data>
or simply
<data>
<data> 0 to 100 (NR1 numerical data)
Example To query the contrast (when the contrast is 60)
PC>
:DISPlay:CONTrast?
ST5520>
:DISPLAY:CONTRAST 60
(when the
:HEADer
command is ON)
ST5520>
60
(when the
:HEADer
command is OFF)
:DISPlay:BACKlight
Sets the LCD backlight brightness.
0 can be set only from communications. The LCD backlight turns off when 0 is set.
Syntax
:DISPlay:BACKlight <data>
<data> 0 to 3 (NR1 numerical data)
Example To set the brightness to 2
PC>
:DISPlay:BACKlight 2
:DISPlay:BACKlight?
Queries the LCD backlight brightness. The setting is returned in NR1 number data (<data>).
Syntax
:DISPlay:BACKlight?
Response
:DISPLAY:BACKLIGHT <data>
or simply
<data>
<data> 0 to 3 (NR1 numerical data)
Example To query the LCD backlight brightness (when the brightness setting is 2)
PC>
:DISPlay:BACKlight?
ST5520>
:DISPLAY:BACKLIGHT 2
(when the
:HEADer
command is ON)
ST5520>
2
(when the
:HEADer
command is OFF)