146
Command Reference
:PROBe?
Queries the 9299 Switched Probe operation mode setting.
The continuous or trigger setting is returned in text data (<data>).
Syntax
:PROBe?
Response
:PROBE <data>
or simply
<data>
<data> CONTINUE/TRIGGER (text data)
CONTINUE: Continuous mode
TRIGGER: Trigger mode
Example To query the operation mode (when the operation mode setting is
CONTINUE)
PC>
:PROBe?
ST5520>
:PROBE CONTINUE
(when the
:HEADer
command is ON)
ST5520>
CONTINUE
(when the
:HEADer
command is OFF)
:IO:SIGNal
Sets the timing for the TEST signal to return from LOW to HIGH when a test is completed.
Syntax
:IO:SIGNal <data>
<data> SLOW/FAST (text data)
Example To set the timing to FAST
PC>
:IO:SIGNal FAST
:IO:SIGNal?
Queries the timing for the TEST signal to return from LOW to HIGH when a test is completed.
The SLOW or FAST setting is returned in text data (<data>).
Syntax
:IO:SIGNal?
Response
:IO:SIGNAL <data>
or simply
<data>
<data> SLOW/FAST (text data)
Example To query the timing (when the setting is FAST)
PC>
:IO:SIGNal?
ST5520>
:IO:SIGNAL FAST
(when the
:HEADer
command is ON)
ST5520>
FAST
(when the
:HEADer
command is OFF)
To Next Page
Loading...
