62
Checking Short Circuit before Applying the Set Voltage (Short circuit check function)
Setting to AUTO
1
Open the Settings screen.
Select [SET].
2
Set [SHORT CHECK] to [ON].
(When [ON] is selected, the [SHORT CHECK TIME] setting is displayed below.)
Selection
[ON]
[OFF]
Return to the
Measurement
screen.
3
Set [SHORT CHECK TIME] to [AUTO].
Selection
[AUTO]
Return to the
Measurement
screen.
4
On completion of the short circuit check following starting the
measurement, the short circuit check time is displayed.
To Next Page
Loading...
