Opening the Web-based Interface
14
RM Web L3P
Release
4.1
03/08
Establish the connection by entering the IP address of the device which
you want to administer via the Web-based management in the address
field of the Web browser. Enter the address in the following form:
http://xxx.xxx.xxx.xxx
The login window appears on the screen.
Figure 2: Login window
Select the desired language.
In the drop-down menu, you select
– user, to have read access, or
– admin, to have read and write access
to the device.
The password “public”, with which you have read access, appears in the
password field. If you wish to have write access to the device, then high-
light the contents of the password field and overwrite it with the password
“private” (default setting).
Click on OK.
The Web site of the device appears on the screen.
To Next Page
Loading...
Need help?
General
