Opening the Web-based Interface
RM Web L3P
Release
4.1
03/08
15
Note: The changes you make in the dialogs are copied to the device when
you click on “Write”. Click on “Load” to update the display.
Note: You can block your access to the device by entering an incorrect con-
figuration.
Activating the function “Cancel configuration change” in the “Load/Save”
dialog enables you to return automatically to the last configuration after a set
time period has elapsed. This gives you back your access to the device.
Figure 3: Website of the device with speech-bubble help
To Next Page
Loading...
Need help?
General
