Redundancy
168
8.4
Rapid Spanning Tree
RM Web L3P
Release
4.1
03/08
– MAC Address: Displays the MAC address of this Switch
– Topology Changes: Displays the number of changes since
the start of RSTP
– Time since last change: Displays the time that has elapsed since the
last network reconfiguration
Figure 66: Display: Priority, MAC Address, Topology Changes and Time since last
change
If required, change the values for “Hello Time”, “Forward Delay” and “Max.
Age” in the root Switch. The root Switch then transfers this data to the oth-
er Switches. The dialog displays the data received from the root Switch in
the left column. In the right column you enter the values which shall apply
when this Switch becomes a root Switch. For the configuration, take note
of table 33.
To Next Page
Loading...
Need help?
General
