Switching
RM Web L3P
Release
4.1
03/08
5.5
VLAN
87
destination port if the receiving port is also a member of the VLAN group
of the destination port.
Application area: In the case of overlapping VLANs, the device can dis-
tribute directly across VLANs, as long as the ports involved belong to one
group of VLANs.
Perform a warm start (see on page 37 „Restart“) of the device if you have
changed the mode. Thus the device takes over the setting under "Mode".
Note: The device displays the current status under "Status" in the "Learn-
ing" frame.
Figure 33: VLAN Global dialog