Make sure to install a dust filter to equipment. If you do not, dusts enter into the
equipment and the short circuit fire may occur as a result.
Before you clean or replace the dust filter or the case fan of this equipment,
make sure you shut down the OS, turn off the main power of the equipment,
and wait for at least one minute. Otherwise, the injury of hands and fingers
may result.
⚫ Before you move this equipment, make sure you shut down the OS,
disconnect the plug of the power cord from the outlet, and wait for at least one
minute. If you do not, the HDDs and other devices may fail.
⚫ When you transport or carry the equipment, pack it in the dedicated container
(container and packing materials used when the equipment was delivered).
If you use other container or packing materials, that may damage the
equipment.
⚫ Do not use damaged or broken dedicated container when you transport or
carry the equipment. If you do, that may damage the equipment.
To Next Page
Loading...
