Hitachi 65 - Page 252

9. TROUBLE SHOOTING
9-24
Table 9-3 Event Log Entries Unique to the Equipment (2/3)
No.
Event
ID
Source
Type
Description
Action
13
282
HFWRAS_SYS
Information
Revolutions of system fan2
returned to normal value.
No handling.
14
519
HFWRAS_SYS
Error
A failure occurred in the
RAS MCU.
The RAS MCU might be
malfunctioning. Contact your system
administrator or maintenance personnel.
15
524
HFWRAS_SYS
Information
In the current settings,
memory dump file won't
be saved. %1
See “8.2.1” and take action, or see
“8.2.2” and change the setting by
manual operation.
16
525
HFWRAS_SYS
Information
In the DIMM %1, error
correctings have occurred
with high frequency.
The DIMM may be out of order. Contact
your system administrator or
maintenance personnel.
17
539
HFWRAS_SYS
Error
The "%1" was finished.
Hardware monitoring of the RAS
software has been terminated. If
restarting the equipment does not
resolve the error, contact the system
administrator or maintenance personnel.
18
540
HFWRAS_SYS
Information
In the DIMM %1, detected
the number of single bit
error from the OS boot
is %2 times(difference
between the last time:%3).
No handling.
19
541
HFWRAS_SYS
Warning
DIMM %1 failure might
occur.
The DIMM may be out of order. Contact
your system administrator or
maintenance personnel.
20
769
HFWRAS_APP
Error
An error occurred in %1.
errorcode = %2.
An error was generated by the RAS
software while the software was
running. If restarting the equipment does
not resolve the error, contact the system
administrator or maintenance personnel.
21
771
HFWRAS_APP
Error
Because a wrong value is
set up in registry value
"%1", default value %2 is
set up.
If restarting the equipment does not
resolve the error, contact the system
administrator or maintenance personnel.
22
800
HFWRAS_SYS
Information
%1
Detailed code = %2.
A STOP error has occurred. Check the
error and contact your system
administrator or maintenance personnel.