Hitachi 65 - Page 254

9. TROUBLE SHOOTING
9-26
No.7 : %1 denotes the drive bay number. %2 denotes the manufacturer and the model name of the drive.
No.9 : %1 denotes the drive bay number.
No.15 : One of the following messages is written as the cause in %1.
%1
Complete memory dump is not selected from the Write debugging information drop-
down list.
The Overwrite any existing file check box is not selected.
The paging file size is insufficient.
The memory dump file does not exist or is too small.
No.16 : %1 denotes the slot number of the DIMM.
No.17 : %1 records one of the following :
FAN, TEMP, RMTSTDN, MEM, CPU, TEMPLOG, WDT, RAID1, RAID SMART, SMART,
USETIME, RASLOG, INTERNAL – LOGD
No.18 : %1 denotes the slot number of the DIMM. %2 denotes the cumulative single bit error detection
count.
No.19 : %1 denotes the slot number of the DIMM.
No.20 : %1 denotes the function terminated with an error. %2 denotes the error code.
No.21 : %1 denotes the registry key that has an illegal value. %2 denotes the default value of the registry
key.
No.22 : %1 and %2 record one of the following combinations :
%1
%2
Reset signal was input.
0x9201
PCI Bus Parity Error
0x9202
Uncorrectable Error at DIMM B1 or DIMM B2.
0x9217
Uncorrectable Error at DIMM A1 or DIMM A2.
0x9218
No.23 : %1 denotes the power shutdown reason code.
No.24, No.28, No.29, No.30 : %1 denotes the Drive bay No.