EasyManuals Logo
Home>Hitachi>Microscope>TM3000

Hitachi TM3000 User Manual

Hitachi TM3000
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
SAFETY - 5
For the Safe Handling of the System
Warnings Provided in the Instruction Manual
(continued)
WARNING
Injury by heavy load
The system is a heavy object weighing approximately 63 kg. Install the system on a
table with a minimum load bearing capacity of 100 kg. Installing it on a table with an
inadequate load bearing capacity can cause the table to break, which can result in
unexpected injury beyond damage to the system.
To avoid injury from the falling or toppling of the system, do not install the equipment in
an unstable place or a place liable to fall or toppling due to an earthquake or other
events.
Do not install the device when delivering and do not transfer the device after
installation. Our engineer must carry out it.
(Chapter 1. Specifications and Installation Conditions)
As a rule, do not move the diaphragm pump because it is a heavy load of 4.5 kg. When
moving it by necessity, move it carefully after considering the length of piping and
cable, the safety to one's foot, and impact to the pump.
(Chapter 1. Specifications and Installation Conditions)
Injury by volatile solvent
When using a volatile solvent during the cleaning of parts for the system, verify
information (MSDS and the like) on the nature and handling of the solvent, and be
sure to handle it properly.
(1) Do not such chemicals near an open fire.
(2) Ventilate a room.
(3) Wear the directed protection tool.
(Chapter 5. Maintenance)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi TM3000 and is the answer not in the manual?

Hitachi TM3000 Specifications

General IconGeneral
BrandHitachi
ModelTM3000
CategoryMicroscope
LanguageEnglish

Related product manuals