4 - 45
4.3.4 Edit Menu
Figure 4.3.4 Edit Menu
1. Copy Image Copies the image being observed to the clipboard. This button is enabled
when the View mode is the freeze mode.
The image size produced by the image copying process is 640x480 pixels for a freeze
image, 1280x960 pixels for a freeze image after the execution of save, and 1280x960
pixels for a freeze image after the execution of the Digital Zoom screen.
2. Data Entry/Measurement… Displays the data entry/measurement screen. This
screen is operable when the View mode is the Freeze image mode. A maximum of 50
characters and graphics can be written onto the image. In addition, the distance between
two points can be measured on this screen. Edited images can be saved as image files
(image save size: 640x480 pixels (image only), 640x520 pixels (image + information), and
640×550 pixels (image + information + comments)).
3. Digital Zoom… After capturing a detailed image during the observation process,
displays a digital zoom screen. Images are captured in the same processing as the saving
process. On the digital zooming screen, any part to be enlarged can be specified to display a
digital zoom image (an image 2x or 4x relative to the image being displayed. Digital zoom
images can be saved as image files (image save size: 640x480 pixels (image only),
640x520 pixels (image + information), and 640×550 pixels (image + information +
comments)).
To Next Page
Loading...
Need help?
General
