2 - 11
NOTE : If the Instruction Manual is already installed, the window shown below appears. If
this is the case, click [OK], uninstall the Instruction Manual, and then re-install it.
(For details on the uninstall process, see [2.2.12 Uninstalling an Instruction
Manual]).
Figure 2.2.2-3 Message
3. The following window appears. Click the [OK] button.
Figure 2.2.2-4 Choose Setup Language
4. The following window appears. Please wait slightly.
Figure 2.2.2-5 Preparing to Install
To Next Page
Loading...
