2 - 46
10. In the observation screen size field of the [Observation screen size settings], enter the
length of the red line that was measured, and click the [SET] button.
※ The observation screen size to be used depends on the particular PC environment to be
used.
Click
Click
Figure 2.2.9-10 Observation Screen Size Settings Window
11. Click the [Close] button to close the [Observation Screen Size Setup] window.
12. Select either the [X] button at the right edge of the Operation window title bar or [Exit]
from the [File] menu to close the application program.
13. When the closure verification window as shown in Figure 2.2.9-11 appears, click the
[OK] button to close the application.
Click
Figure 2.2.9-11 Application Closure Verification Window
To Next Page
Loading...
