85
5.6. Cleaning Gutter
If the ink recovery system is dried up or is clogged, the gutter can be cleaned to clean the range from the gutter
to the ink main tank.
● You cannot perform this operation during ink ejection. Switch the unit to the stop state before performing it.
● Prepare the cleaning bottle and beaker containing makeup, and remove the print head cover.
● Consecutive gutter cleaning may cause thinning of ink, resulting in printing disturbance. Ink replacement may
be required after the printing disturbance is corrected. Limit the number of times that consecutive gutter
cleaning is performed to a maximum of two.
Move to the first screen of the [Circulation control] screen and press Gutter cleaning.
Upon pressing it, gutter cleaning (suction from the gutter) starts.
[Circulation control] (1/3) screen (selecting [Gutter cleaning])
[Gutter cleaning] screen
To Next Page
Loading...
