EasyManuals Logo

Hitachi UX2 Technical Manual

Hitachi UX2
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
144
7. Maintenance Service
Perform the maintenance work below to keep performance of the unit.
NOTE
Use consumables and periodic replacement parts designated by Hitachi.
If you use parts that are not designated by Hitachi, the specified performance may not be
delivered.
(1) Replacement of consumables
Replace the consumables of the unit listed below according to the recommended time of replacement.
Recommended time of replacement
No
.
Consumable
(order name)
Recommend
ed time of
replacement
Parts code
No.
Remarks
1
Ink filter
(ink filter part)
2,400 hours
451867
For the replacement procedure,
see "5.7. Replacing Ink Filter".
2
Recovery filter
(mini filter part)
1,200 hours
451857
One pack contains two parts.
For the replacement procedure,
see "5.8. Replacing Recovery Filter".
3
Air filter
(air filter AF3 part)
2,400 hours
451963
One pack contains two parts.
For the replacement procedure, see (3) in this
section.
4
Cleaning station filter
(cleaning station filter part)
(*1)
452199
Only model with Cleaning station.
For the replacement procedure,
see "6.1. Installation of ".
5
Cleaning solvent container
(cleaning solvent container part)
2 years
(*2)
452200
Only model with Cleaning station.
For the replacement procedure,
see "6.1. Installation of ".
In a typical operation case (eight hours per day, 25 days per month), 2,400 hours equals one year.
The minimum retention period of repair parts for the IJ Printer, including consumables, is seven years
after discontinuation of manufacture.
When ordering consumables, provide the order name and the Parts code number.
The periodic replacement parts differ depending on the ink type. See the handling guidance of each ink
"4. Precautions" for details.
(*1) Because the amount of accumulated dirt varies depending on the operating frequency and operating
environment, the recommended time is not set. The recommended time and method of replacement are
described in Section 6.4. Maintenance of Cleaning Station .
(*2) The degree of deterioration of the cleaning solvent container varies depending on the operating
frequency and operating environment. If the surface of the cleaning solvent container is broken,
cracked, or chipped, stop using it and replace it with a new one.

Table of Contents

Other manuals for Hitachi UX2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi UX2 and is the answer not in the manual?

Hitachi UX2 Specifications

General IconGeneral
BrandHitachi
ModelUX2
CategoryPrinter
LanguageEnglish

Related product manuals