Hitachi UX2 - Selecting User to be Logged in at Power-On

18
3.3. Selecting User to be Logged in at Power-on
(1) Overview
Select whether to display the login screen at power-on.
(2) Setup procedure
When you log in to the system as the administrator, the [Login management] screen appears.
Perform to described in 3.2. (2) Setup procedure.
Press Using environment setup on the [Login management] screen.
[Login management menu] screen ([Using environment setup])
The [Using environment setup] screen appears.
Screen for selecting [Login method]
1
1
4
2
Select whether to
display the login
screen at power-on.
When
Enable is
selected in [Login
method], the login
screen appears at
power-on.